THE VEPR FORUM

Atterete Dominatum
It is currently Fri Jan 19, 2018 5:10 pm

All times are UTC




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue Sep 06, 2016 5:53 pm 
Offline

Joined: Tue Sep 06, 2016 5:14 pm
Posts: 2
I recently picked up a vepr chambered in 6.5 Grendel. This past weekend I took it out shooting and was running into an issue where it was ejecting live rounds. I was putting weight on the mag while shooting, the rife is all stock using the mags that came with it. What could be the cause and solution to this problem?

I also have been having issues with the next round failing to feed into the chamber for firing.

Any help would be greatly appreciated.


Top
 Profile  
 
PostPosted: Thu Sep 08, 2016 2:12 am 
Offline
User avatar

Joined: Tue Dec 31, 2013 8:46 am
Posts: 236
Location: Knoxville, TN
I do not believe anyone here has much experience with the Vepr in 6.5 Grendel. I have never seen an AK eject live rounds. My old SKS used to eject live rounds and fail to feed. It was due to defective aftermarket magazine. Switching back to OEM fixed mag solved that problem.

Since your rifle is brand new and unmodified, using OEM magazines and experiencing issues uncommon to the platform, I think its fair to say that your rifle is defective and you should seek repair/replacement from the Vendor as soon as possible.


Top
 Profile  
 
PostPosted: Fri Sep 09, 2016 1:41 am 
Offline

Joined: Tue Sep 06, 2016 5:14 pm
Posts: 2
Thank you kar120c that is what I was leaning to as well, I appreciate your input.


Top
 Profile  
 
PostPosted: Sun Sep 11, 2016 6:29 am 
Offline
Big Sal
User avatar

Joined: Mon Sep 24, 2012 1:19 am
Posts: 2390
Location: The Idaho Panhandle
I agree with Karl. Out of curiosity, was the ammo steel case or brass?

best,
BigSal

_________________
Vepr Dot Org


Top
 Profile  
 
PostPosted: Sun Dec 03, 2017 12:53 am 
Offline

Joined: Sun Dec 03, 2017 12:38 am
Posts: 2
New to the forum and I apologize for resurrecting this post from the dead, but I have also been having problems with my 6.5 G Vepr. Just like OP, my Vepr is all stock and using the factory 10 round magazines. I have only shot around 80-100 rounds from it, so it is still very new. I first shot a 20 round box of Hornady 123 gr A-MAX with no problems. That ammo is fairly expensive, so I bought 240 rounds of Wolf Ammo (100 gr FMJ). My rifle has since had some sort of problem with 25-30% of shots fired, but sporadically, meaning I might go through a full mag with no problems, or I might have 2-5 cartridges fail. My issues have been cartridges getting jammed into the chamber sideways and pushing the bullet into the casing, having live rounds get ejected instead of firing, stovepipes, etc. Does anybody else have experience with the Wolf Ammo? (which is steel case btw) Did I just get a bad batch of ammo? Is it the magazines? Is my Vepr just a lemon? Any insight would be much appreciated. And OP, did you ever resolve your issue or did you get rid of the gun and try something else?


Top
 Profile  
 
PostPosted: Thu Jan 18, 2018 12:38 am 
Offline

Joined: Wed Sep 04, 2013 5:56 pm
Posts: 4
I'm having a similar issue. I've only shot a few mags worth of ammo(wolf 100grain) from mine and am having an issue almost exclusively after the first shot from a fully loaded 10rd mag, round #2 in the mag gets flung up and left and jams the gun up. I've also had it eject a live round once.
Just tonight I did a little experiment, I loaded a mag to 10+1 and it still happened on the same round within the mag, so the first shot went well. It seems to work every time other than that.
It's tempting to load up expensive brass and see what happens, because it's like clockwork with the wolf ammo when it happens.
I've also noticed that the sharp edge of the rim of that round catches very hard on the cartridge below it and leaves a deep scratch along it(I originally suspected the bolt of doing this, but have found that it's not), so maybe the sharp rim is oversized and to blame? Otherwise I suspect that I'd be fine if if I only load 9rds in my gun if I want it to work correctly with this cheap ammo.
I've taken a grinding belt and quickly filed the sharpness from the front of the rim and it feeds 1000% better pushing with my finger, I can actually push the cartridge forward and out of the mag with ease. I'm going to have myself a little experiment and maybe have to load round #9 out of a specific box of ammo I've done that to.
I'll get back to you about how that works, and I suggest you guys try it if you get the chance first. If this trick works, I'm just going to go through my stash and spend the few seconds it takes per round and do them all. It's still far more worth it than paying $1 per round for another brand. I already did an entire 20rd box so I can load it in the top couple rounds and continue topping off the mag above 8rds and see if it fixes it. I suspect it will.


Top
 Profile  
 
PostPosted: Fri Jan 19, 2018 12:28 am 
Offline

Joined: Sun Dec 03, 2017 12:38 am
Posts: 2
Interesting. I had not thought to look at how the rounds themselves were interacting with each other in the mag when feeding. Other than ensuring that they were all seated appropriately against the back wall. I'm interested to hear how this works for you. I really only went for the 6.5 G knowing Wolf was an option. I plan on hand loading eventually, but that'll be a while before I can afford a set up for that. And it''l be even harder to save money shooting $1 rounds! :lol:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group